Product Descriptions

<< Return to Catalog Groups

Benches
T.F.M.C. benches are distinguished by quality, strength and beauty in a variety of comfortable seat designs. Our selections of styles range from decorative to heavy duty, formal to casual. Suitable for all applications inside and outside, they are available in a variety of materials ranging from hot dipped galvanized fabricated steel, cast iron or virtually maintenance free cast aluminum.
Extremely strict quality control during the manufacturing process ensures only the best product for our customers and our warranty speaks for itself. All hot dipped galvanized steel benches are warranted for eight (8) years against breakage rust during normal commercial use. All aluminum benches with plastic lumber or Ipe wood only are warranted for ten (10) years against breakage or rust during normal commercial use. Warranty does not apply to damage caused by negligence, abuse, vandalism, accident, normal wear and tear, corrosion due to de-icing chemicals, rock salt, sea salt, acid rain, damage resulting from shipping, improper installation or alteration.
T.F.M.C. also strives to be as efficient and environmentally conscious as possible in all aspects of its operation and therefore we use lumber only from suppliers implementing sound forest management practices including selective harvesting and low impact logging. We also promote recycled plastic lumber as a viable alternative to wood. It looks great, will outlast any wood and is maintenance free! Any type of wood or recycled plastic lumber is available for use on our benches however the standard wood used is South American Ipe. This hard Brazilian species dries very well and is known for its strength and natural resistance to decay. Stainless steel hardware is standard for all benches. Vandal resistant or customer's preference of hardware upon request. All standard RAL colors are available as well as customer specified custom colors.
Custom designs and applications for site furnishings and benches are common requests at T.F.M.C. and we are experienced and prepared to meet all design challenges. From our selection of benches you can choose from a selection of paint and wood stain colors. Lengths and layouts can be varied to your specifications. Incorporate logos and names or plaques onto your bench, replicate existing historical seating, make custom arms for your existing seating or simply design an entirely new concept depending on your requirements. T.F.M.C. benches are truly made for the future. Contact your sales representative for more information.
View Benches >

Lighting
Toronto Fabricating & Mfg. Co.. manufactures a large assortment of architectural and ornamental cast aluminum poles and luminaires suitable for street and pedestrian lighting as well as a selection of sconces and accessories such as banner arms, flowerpot holders and signage literally creating hundreds of combinations for your outdoor lighting requirements. From incandescent to H.I.D., designs range from contemporary to reproductions of authentic vintage lamp standards, all crafted with careful attention to detail. Bases are made of heavy wall cast aluminum .356 alloy for high tensile strength while columns are cast or extruded aluminum. All poles are double or triple circumferentially welded to ensure strength, transmit wind load and increase longevity. Options include photocells for automatic dusk to dawn operation and electrical receptacles for Christmas lights and other equipment. All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information.
View Lighting >

Wall Sconces
Toronto Fabricating & Mfg. Co..manufactures a large assortment of architectural and ornamental cast aluminum sconces and pillar mounted light fixtures suitable for street and pedestrian lighting. From incandescent to H.I.D., designs range from contemporary to reproductions of authentic vintage, all crafted with careful attention to detail. Wall mounted or pole mounted, sconces are made of heavy wall cast aluminum .356 alloy for high tensile strength. Options include photocells for automatic dusk to dawn operation and electrical receptacles for Christmas lights and other equipment. All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information.
View Sconces >

Trash Receptacles
Toronto Fabricating & Mfg. Co. manufactures a selection of tough, decorative trash containers suitable for most applications, from malls to urban streetscapes to parks and recreation areas. Designed not only to collect litter, but to tastefully compliment their surroundings and weather the rigors of a harsh urban environment, all T.F.M.C. trash cans are hot dipped galvanized steel with optional cast aluminum or galvanized spun metal lids. Units are available with a polyethylene liner and may be free standing or with lugs for bolting to surface. All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into existing designs and custom designs and applications are welcome. Contact your T.F.M.C sales representative for more information.
View Trash Receptacles >

Bollards
Bollards are a simple, decorative yet unobtrusive way to control and deter vehicular traffic while promoting free pedestrian access to paths and public areas. T.F.M.C. produces a selection of decorative, heavy duty and lighting bollards to meet a variety of landscape and design requirements in cast aluminum, galvanized steel and iron. All standard RAL colors are available as well as customer specified custom colors. All decorative and light bollards are surface mount only, while some heavy duty bollards may be direct burial installation for maximum security. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information
View Bollards >

Bicycle Racks
Heavy-duty T.F.M.C. bicycle rack parking systems are architecturally distinctive and offer superior bike security and protection from theft while complimenting their surroundings. All T.F.M.C. bicycle racks provide maximum security by allowing both the tire and frame to be locked with a standard u-lock. All steel components are hot dipped galvanized and painted for ultimate durability. All standard RAL colors are available as well as customer specified custom colors. Units may be surface mounted but are recommended for direct burial installation for maximum security. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information.
View Bicycle Racks >

Tree Guards
In high traffic areas, young landscaped trees are often vulnerable to carelessness, vandals and animals. T.F.M.C. Tree guards are beneficial in these situations, offering significant protection and promoting healthier tree growth in a variety of designs. Standard T.F.M.C. tree guards are hot dipped galvanized steel, 5' high, 16" in diameter, in two halves bolted together around the tree. Available freestanding or with lugs for mounting to ground or grate. All standard RAL colors are available as well as customer specified custom colors. Custom sizes, designs and applications are welcome. Contact your T.F.M.C. sales representative for more information.
View Tree Guards >

Tree Grates
Tree grates are an essential finishing touch for any landscaped urban area from streetscapes to corporate offices, government institutions to suburban developments. T.F.M.C. produces a selection of cast iron and cast aluminum tree grates geared to enhance landscaping while helping to provide the moisture, air and protection needed to have strong, healthy trees. The tree grates shown here are a sample of standard designs available. Custom designs and most manufacturers styles can be closely matched. Hot dipped galvanized steel frames are also available for all grates. All standard RAL colors are available as well as customer specified custom colors. The majority of general contractors have their own methods for installing tree grates and frames however there are a few key procedures which should be followed to insure proper installation. Frame installation is of great importance to encourage proper grate positioning. Caution must be taken to keep the frames level and completely square or round during installation. After the tree is planted, the tree grates are fitted around the tree and into the frames. Grates provided in two piece sections are simply placed into the frame. Grates provided in greater than two piece sections will have bolt lugs underneath for bolting the sections together. It is also recommended that suitable supports be placed under the sections. Bolts and supports are to be supplied by others. Contact your T.F.M.C. sales representative for more information.
View Tree Grates >

Planters
Decorative planters are an integral part of any designed urban setting and Toronto Fabricating & Mfg. Co. manufactures a wide selection of durable, functional and attractive planters suitable for most applications from malls to urban streetscapes to private estates. Standard T.F.M.C. planters are made to endure the harsh urban environment and designed to compliment their surroundings. All steel and iron planters are hot dipped galvanized. Also available is recycled plastic or South American Ipe wood covering a galvanized steel frame. Units are available with a galvanized steel liner and may be free standing or with lugs for bolting to surface. All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into existing designs and custom designs and applications are welcome. Contact your T.F.M.C sales representative for more information.
View Planters >

Luminaires
Toronto Fabricating & Mfg. Co. manufactures a large selction of lanterns and luminaires suitable for residential and commercial lighting applications. Cast aluminum or hand formed copper units are available for individual purchase or may be paired with one of T.F.M.C.'s large selection of cast aluminum poles.Available with clear or opaque lens in glass or shatter resistant polyethelene, lexan or acrylic.From incandescent to H.I.D., options include photocells for automatic dusk to dawn operation and electrical receptacles for Christmas lights and other equipment. All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information.
View Luminaires >

Table Bases
Toronto Fabricating & Mfg. Co. produces a comprehensive selection of heavy duty decorative pedestal table bases. Suitable for casual to fine dining, as well as some residential applications, these bases will offer support when you most need it... always. All table bases are cast iron unless otherwise specified. All standard RAL colors are available as well as customer specified custom colors. Inquire also about custom paint finishes. All bases available assembled or unassembled. Leveling glides are standard. Tops are not supplied by T.F.M.C. and are not included in the price quoted. For your convenience, we've supplied the following top size guide for our bases. These are guidelines only for normal weight wooden tops. Talk to your sales representative for more information on top sizing with different materials and for stand up bases.

*For all round pedestal bases:17" & 18" dia. base use up to 30" top
22" & 24" dia. base use up to 36" top
30" dia. base use up to 60" top
*Style #4415 Cross table base: 22" base use up to 30" top
30" base use up to 48" top
*Style #4460 table base: 22" base use up to 30" top
27" base use up to 46" top
*Style #4477 22" base use up to 30" top
Queen anne table base: 26" base use up to 48" top
32" base use up to 60" top
*Style #4472 & 4473:
cafe style base both use up to 30" top
*Style #4426 bolt down: use up to 36" top
*Style #4412 pub table base: use up to 30" top
*Style #4401: use up to 30" top
*Style #4402: use up to 36" top
*Style #4403: use up to 60" top
View Table Bases >

Accessories
Many T.F.M.C. products are available with a number of options and accessories including banner arm attachments, skateboard protectors,ashtray attachments, plaques and center arm attachments.All T.F.M.C. accessories are built with the same strength and durability as all other standard T.F.M.C. products and are carefully designed to flawlessly integrate into existing T.F.M.C. products.All standard RAL colors are available as well as customer specified custom colors. Logos and names can be incorporated into some existing designs and as always, custom designs and applications are welcomed. Contact your T.F.M.C. sales representative for more information.
View Accessories >

Custom Fabrication
Custom designs and applications for site amenities and public seating are common requests at T.F.M.C.. We are experienced and prepared to meet all design and engineering challenges while our quality control process insures the consistency of workmanship that our customers have come to expect from us. With designs ranging from nostalgic to contemporary, our products will compliment any indoor or outdoor environment and our in house design team can assist with custom applications or concepts ranging from completely original to modifying existing items to customer specifications. Let our in-house pattern and machine shop turn your specifications into accurate tooling. Custom designs and reproductions of lost historical designs has become one of our specialties and our pattern and machine shop has created scaled tooling from as little as a customer's photo or drawings of old street lighting posts or other products and turned them into modern day replicas with up-to-date materials and lighting optics. Custom sand castings are available in aluminum, iron, brass and bronze.
View Custom Fabrication >